Barco SLite Series, Руководство по установке

Страница: 28 / 41

3. Physical installation
3.3 Cabling of the SLite display
Overview
• SLite tile input/output ports
• Power cabling
• Data cabling
3.3.1 SLite tile input/output ports
Location input/output ports
There are four connection ports on the back of each SLite tile. Two power ports and two data ports. All ports are waterproof and
located on the ’Connection module’.
The data ports consist of two waterproof MDR connectors at the right side of the connection module. The data is coming in on the
lower right MDR connector of the connection module. The upper right MDR connector is used to loop the data through.
The power ports consist in one waterproof C19 connector in the lower left corner and one waterproof C20 connector in the upper
left corner of the connection module, respectively used for power input and power output.
B
C
A
D
E
Image 3-13
SLite input/output ports.
A Connection module.
B Power input port.
C Power output port.
D Data input port.
E Data output port.
A
Image 3-14
A Plug holder clamp.
The SLite input/output ports can only be used in conjunction with Barco’s outdoor cables for LED-walls. Do
not use any other cables then those specified.
Dummy plugs must be placed on unused connection ports of the connection module and all plug holder
clamps must be locked firmly.
24 R5976575 FIXED SLITE DISPLAY 17102003