Barco SIM 5W, Руководство пользователя

Страница: 82 / 195

7. Advanced
Image 7-48
UsePictureBox can be disabled ( 0 ) or enabled ( 1 ). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very speci fi c situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the Start pixels,
Active pixels, Start lines, Active lines . In that case, hit Enter and change the slider to position 1 , thus enabling more settings in the
Edit fi le menu.
Image 7-49
In the current software versions (1.22 for (Galaxy)NH-12, 1.23 for (Galaxy) NW-12, 1.02 for SIM 5W), changing
the
UsePictureBox settings also inverts the interlacing!
7.5.6 Save as (create a custom fi le)
Creating a custom fi le
When the loaded fi le is a standard fi le there is a possibility of saving it as a custom fi le (= creating a custom fi le) , this is done with
the save as function. The saved fi le will always be a custom fi le (saved in the custom directory)
For sources that are often used, a custom fi le should be created. This custom fi le will then be loaded auto-
matically and will prevent the AutoImage from being launched.
How to save a fi le ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Save as...
Image 7-50
5. Press ENTER
A dialog box is displayed
Use
← or → , ↓ or ↑ the numeric keys on the remote, or the keypad to edit and change the fi le name, con fi rm with ENTER.
78 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals