Barco SIM 5H, Руководство пользователя

Страница: 120 / 173

7. Advanced
Image 7-136
9. Press ENTER
A white bullet indicates the active setting
7.7.6.4 Dynacolor adjustments
Overview
• Introduction
• Calibration for the standard mode (for multiple projectors)
• Common color values
• In fi tec common color values
7.7.6.4.1 Introduction
Standard Dynacolor adjustment procedure (multiple projectors)
The adjustment of Dynacolor consists of :
1.
Measuring the color values for each projector (Calibration procedure)
2. Calculating the common values fi lling them in the desired value of every projector
The In fi tec Dynacolor calibration can also be done over multiple projectors. Common values must be calcu-
lated and fi lled in every projector.
In case one uses linked Dynacolor, the master projector will calculate the common values and force them on
all (the linked) slave projectors
7.7.6.4.2 Calibration for the standard mode (for multiple projectors)
What has to be done ?
The calibration of Dynacolor consists of measuring the color values of each projector. The measurements have to be done in a
dark environment. Make sure all external lights are off (even a PC screen can produce too much unwanted light). Use a light
meter (PR655, LMT, …) and at a
fi xed position during the entire measurement. In the procedure below we consider a system of 2
projectors.
C
AUTION
:
Only to be done by quali fi ed personnel ! Never change the values if not needed. Altered color
values will not guarantee optimal image reproduction.
116 R59770247 SIM 5H 04/06/2008