Barco RLM W Series Скачать руководство пользователя

Страница: 16 / 151

2. Installation

Launching Projector Toolset on Mac OS X

To start the Projector Toolset software on Mac OS X system:
1. With Finder, go to the Applications folder under your home folder.

2. Double-click on the Projector_Toolset icon to start the application.

It can take a while to start up. First splash screen opens.

The software starts up with the latest used con

guration or, if new plug-ins or updated plug-ins are

downloaded, with overview table of the downloaded plug-ins. All plug-ins in the table are selected by
default. (image 2-3)

3. Unselect the plug-ins which you do not want to install.

Or,
click on

Unselect all

and then select the plug-ins you want to install.

Select all

will check all plug-ins at once.

4. Click

to install the selected plug-ins.

When all plug-ins are installed, a restart message is displayed. (image 2-4)

5. Click

Yes

to shutdown the application and restart the application.

Click

to continue working with the old plug-ins.

6. Once Projector Toolset is fully started, it has the following look and feel. (image 2-5)

Image 2-5
Look and feel on MAC

Launching Projector Toolset on Linux

To start the Projector Toolset software on a Linux system:
1. Go to your home folder.

2. Double click on the Projector_Toolset icon to start the application.

It can take a while to start up. First splash screen opens.

The software starts up with the latest used con

guration or, if new plug-ins or updated plug-ins are

downloaded, with overview table of the downloaded plug-ins. All plug-ins in the table are selected by
default. (image 2-3)

3. Unselect the plug-ins which you do not want to install.

Or,
click on

Unselect all

and then select the plug-ins you want to install.

Select all

will check all plug-ins at once.

R59770513 RLM W-SERIES 28/07/2010

Содержание RLM W Series
























































































































































Результаты поиска

Содержание RLM W Series

Отзывы:

Похожие инструкции для RLM W Series

Бренды по названию

Популярные бренды

Barco RLM W Series, Справочное руководство

Результаты поиска

Содержание RLM W Series

Отзывы:

Похожие инструкции для RLM W Series

Бренды по названию

Популярные бренды