Barco RLM G5 Performer, Руководство по обслуживанию

Страница: 85 / 114

11. Light Pad adjustment
E
Cold Mirror
E
5.5m
m
Image 11-6
Nominal setting of the cold mirror
Alignment of the Illumination path
1. Turn on the projector and displays a white test pattern (See manual).
2. Adjust the folding mirror until the DMD is illuminated by the light spot symmetrically. (image 11-7)
3. Rotate the rod until dark borders are visible in the corners of the image. (image 11-8)
4. Adjust the horizontal position of the rod, by turning the ring (D), for sharp outline at the dark borders.
5. Rotate the rod back to its nominal position.
6. Adjust the light spot size lens (B) until the light spot on the DMD is slightly larger than the DMD size. (image 11-9)
7. Repeat the adjustment of the border sharpness, step 3 to 5 in this procedure.
8. Finally, secure the position of the controls by tightening and fixing with appropriate glue the respective screws (A), (B) and (C).
A
B
Light spot
DMD
DMD
Image 11-7
Folding mirror adjustment
76 R5976766 RLM G5 22/04/2004