44 _____________________________________________________Barco - RHDM-2301 - User manual
Full functionality description
4.1.5 Status bar
The status bar is shown at the top of the screen and contains information related to the
selected signals for window 1 and window 2.
Figure 24: Screenshot status bar (upper part – left side, lower part – right side)
The following information is shown:
• Window for which the information is valid
• Input board that is used to process the selected input signal
• Input detection overrule indicator
• Input signal description
• OETF
• Color subsampling
• Encoding
• Scale mode
• Aspect ratio
• Backlight scan mode
• Light output
• Color working space
• Latency of the input signal selected by the active window (0 ms when no signal is
connected)
The information of the active window (displayed on the screen) is highlighted in white.
NOTE
:
In dual view or pan&zoom mode, both input signals selected by the windows are shown on the screen.
The active window is still highlighted in white in the status bar and refers to the fact that certain
settings can be changed for the active window only (e.g. toggle between color and monochrome by
pressing (
)
will only be applied to the active window).
