Barco REALITY 9200 DLC R9001397, Руководство пользователя

Страница: 43 / 59

9-3
Installation Mode
5975109A BARCOREALITY 9200 DLC 020798
The pattern shows lines of one pixel.
Near six lines on the displayed pattern, a screw is drawn with a
number next to it (e.g. if displayed in green = corresponding with the
screws and numbers on the green LCD panel).
When turning a screw in the direction marked by the arrow above the
displayed screw on the screen, the line on the screen moves in the
direction of the straight arrow.
Green focusing
a. Adjust the projection lens until optimal focus for the green line 3 is
obtained (hint : use the focusing marker lines next to the indicated
points)
b. Turn screw 1 for optimal focus of the corresponding green line 1 on
the screen.
c. Turn screw 2 for optimal focus of the corresponding green line 2 on
the screen.
d. Turn screw 3 for optimal focus of the corresponding green line 3 on
the screen.
The three alignments influence slightly each other, therefore repeat
if necessary the above three steps (b,c and d).
When the green pattern is correctly focused, press EXIT to return to
the Convergence menu.
Red on green convergence.
Use the control disc to hightlight Red on green and press ENTER to
display the Red on green test pattern.
The longest lines are the red lines. These lines must be converged
with the green lines.
The drawn screws and numbers are displayed in red.
Follow next steps :
a. Adjust first screws 1, 2 and 3 to obtain an optimal focus for
respective lines 1, 2 and 3.
Due to slightly interaction, it may be necessary to repeat steps a.
Follow next steps to converge the red lines with the green lines :
b. Start with screws 4 and 5 to adjust for optimal convergence of
respective lines 4 and 5.
c. Adjust screw 6 for optimal convergence of line 6.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to return .
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to return .
3
6
2
1
4 5
To adjust the convergence, there are test patterns provided in the
convergence menu.
Use the control disc to hightlight Convergence and press ENTER to
display the Convergence menu.
Start with the Green test pattern and continue with the Blue on green
and finish with the Red on green.
Use the control disc to select Green and press ENTER to display the
green pattern.
3
6
2
1
4 5