Barco R9852090, Руководство по установке

Страница: 7 / 15

1. XLD(1.45 - 1.8:1) Lens Kit
1. XLD(1.45 - 1.8:1) LENS KIT
1.1 Contents of the XLD(1.45 - 1.8:1) Lens Kit
Kit contents
• XLD(1.45 - 1.8:1) Lens.
• Installation Manual.
• Toraysee TM Cloth.
1.2 Lens Removal
No lens mounted !
The projector leaves the factory with no lens mounted. To protect the engine from e.g. dust, the lens gap is sealed with a foam
cover. Remove the foam cover before lens mounting.
How to remove the mounted lens
1. Support the lens with one hand. (image 1-1)
2. Move the lens lock (A) to the left to unlock the lens securing system.
3. Carefully pull the lens backwards to disconnect the lens zoom connector (B).
4. Take the lens out the lens block.
A
to unlock
to lock
B
Image 1-1
Lens removal
1.3 Lens installation
How to install a lens ?
1. Unlock the lens securing system by putting the lock handle to the left (A). (image 1-2)
2. Move the rear of the lens into the lens block, lining up the lens plug with the lens connector (B) (image 1-2).
3. Carefully push on the lens until the connector seats into the socket.
Note: On the lens block a reference pin (B) is provided to center the lens. For that reason the lens body is provided with a
notch (A) which has to match the reference pin after the lens plug connection into lens socket. (image 1-3)
4. Pull the handle (A) to the right to lock the lens securing system (image 1-2).
R5976679 XLD(1.45 - 1.8:1) LENS 01042004 3