2. Installing the lens
Image 2-6
Lens positioned
5. Put a nut on each rod
Image 2-7
Lens
fi
xation nuts
6. Fix the
fi
xation nuts until the lens
fl
ange touches the lens holder plate at the 3
fi
xation points (nominal position).
7. Unscrew each
fi
xation nut 1 revolution and start adjusting the Scheimp
fl
ug by tightening or loosening these
fi
xation nuts
8. If the adjustment is done, screw in the smaller Allen bolts M4 (see “1” on image 2-8) until they are hand-tight
Image 2-8
Lens: Scheimp
fl
ug securing bolts and nuts
9. Secure the smaller Allen bolts M4 by tightening the nuts (see “2” on image 2-8) to the lens
fl
ange.
10.Install the bottom lens cover
11.Install the top lens cover
R59770110 QSD LENSES 03/11/2008
7
