Barco R9841770, Руководство по установке

Страница: 17 / 23

4. Replacement in case of a SIM 4 projector
4. REPLACEMENT IN CASE OF A SIM 4 PROJECTOR
4.1 Lamp replacement
C
AUTION
:
Do not touch the cover glass with your fingers. If the lamp is touched, finger prints can be removed
by cleaning the lamp with alcohol.
When to replace the lamp?
The lamp must be replaced at the end of lifetime.
Necessary tools
hexagonal ball driver (5)
Start up
1. Push the cursor key ↑ or ↓ to highlight Reset Lamp Run Time. (menu 4-1)
2. Press
ENTER
.
The following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel. (menu 4-2)
3. Press
ENTER
See menu 4-3.
4. Enter the serial number of the new lamp
5. Press
ENTER
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LIGHT OUTPUT
VOLTAGE DIAGNOSTICS
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 4-1
WARNING
---------------------
RISK OF
ELECTRICAL SHOCK
---------------------
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 4-2
Enter serial number:
_ _ _ _ _ _ _
<ENTER> to accept
<EXIT> to return
Menu 4-3
How to replace the lamp ?
1. Unscrew the hexagonal screw (image 4-1)
2. Open the side door (image 4-2)
3. Disconnect the lamp (image 4-3)
4. Use the long screwdriver to move locking handle downwards to unlock the lamp. (image 4-4)
5. Remove the lamp (image 4-5)
6. Mount the new lamp
7. Move lamp locking handle upwards
8. Close and secure the side door
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004 13