Barco R9841550, Руководство по установке

Страница: 13 / 23

4. Removing the old lamp unit
4. REMOVING THE OLD LAMP UNIT
4.1 Extracting the lamp unit
Necessary tools
No tools.
How to remove the lamp unit ?
1. Slide the lamp unit backwards. (image 4-1)
2. Take out the lamp unit and put it on the table. (image 4-2)
3. Take the sides of the lamp connector between thumb and finger
4. Unlock the connector by pushing at the same time on both lock parts and separate the connectors. (image 4-3)
Image 4-1
Image 4-2
Image 4-3
The length of the lamp power cables may differ depending on the lamp type. In case of a lamp with a shorter
cable than that shown on the images then first unplug the connector since extracting the lamp first will be
difficult due to the short cable.
R5976452 UNIVERSAL LAMP KIT FOR 6000 SERIES LCD PROJECTORS 15032002 7