![background image](http://html1.mh-extra.com/html/barco/r9841550/r9841550_installation-notes_4022193003.webp)
1. Safety
1. SAFETY
1.1 Safety
Safety Warnings
The procedures in this manual are intended for use only by qualified service technicians who have been trained and authorized by
BARCO !
Switch the projector to stand by and let it cool down for at least 15 minutes before starting with the lamp replacement. These lamps
consist of a quartz arc tube operating at very high temperature and high pressure which may explode suddenly. There is a risk of
personal injury and property damage from hot quartz arc tube particles if handled incorrectly.
Power down the projector and unplug the power cord from the wall outlet. Once the projector is cooled down and the power is off,
continue with the replacement procedure.
Do not exceed the indicated maximum total lifetime of the lamp for safe operation in normal power mode. Do not use it longer !
Always replace the lamp with the BARCO lamp kit for 6500 projectors.
R5976453 UNIVERSAL LAMP FOR 6000 SERIES PROJECTORS 18042002
1
Содержание R9841550
