Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 94 / 161

14. Switching linked displays To and Out Standby
Message Command sent to display
_______________________________
_______________________________
_______________________________
Menu 14-5
Recap
If the status of a display is On, via the display settings menu the display can be switched into the standby mode. If the status of a
display is Standby, then the display can be switched to the operation mode.
14.1.2 Switching In/Out Standby using the Remote Control
Make sure the Remote Control suits the address of the Cine VERSUM Master or uses the common address.
How to switch one or more displays To or Out standby mode
1. Press the ADJ or ENTER key on the remote control to display the main menu on the screen. (menu 14-6)
2. Using the ↑ and ↓ arrow keys, scroll through the menu items until item ’Installation’ is highlighted (menu 14-6).
3. Press ENTER key to confirm.
The installation menu opens, showing the different installation items. (menu 14-7)
4. Using the ↑ and ↓ arrow keys, scroll through the menu items until item ’Display list’ is highlighted (menu 14-7).
The Display list menu opens, showing the linked displays. (menu 14-8)
5. Using the ↑ and ↓ arrow keys, select the display , whose status you want to change, e.g. Display 2 with status ON (menu 14-8).
6. Press ENTER to confirm.
The Display settings menu opens showing the display setting items for that specific display. (menu 14-9)
7. Scroll through the menu items, using the ↑ and ↓ arrow keys, until item Switch OFF is highlighted (menu 14-9).
8. Press ENTER to confirm.
The selected display switches to the standby mode preceded by a message. Finally, the status of the Display 2 will change to
’Standby’. (menu 14-10)
Cine VERSUM System
Image Settings
Advanced Settings
Installation
Service
1 NO MODULE
2 NO MODULE
3 VIDEO [VIDEO]
4 NO MODULE
5 NO MODULE
6 NO MODULE
7 RGB-YUV [RGB]
8 NO MODULE
Shutdown
Back
Menu 14-6
Installation
Input slots
File service
Display list
Internal pattern
When no signal
Source transition
OSD Configuration
Language
Keystone
Global keystone: Yes
Output: [Largest]
Default input balance
Back
Menu 14-7
Display List
2 CV50 1: On
3 CV50 2: Off (Stdby)
4 CV80 1: On
5 CV120 1: Off (Stdby)
6 CV80 2: On
Back
Menu 14-8
Display settings
Switch OFF
Display Info
Rename
Update Software
IR address: 9
CW Index
Orientation
Projector_mode
Back
Menu 14-9
90 R5976468 CINE VERSUM SYSTEM 03112003