Barco R9840770, Руководство по установке

Страница: 11 / 13

1. TLD (1.2:1) Lens Kit
How to install the new lens?
1. Take the lens assembly out of is packing material and remove the lens caps on both sides.
2. Move the handle (A) of the lens anchor system to the right. (image 1-4)
3. Push the lens in the lens block gap horizontally, until the lens clicks in lens anchor system.
Caution: For a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
Image 1-4
Lens installation
1.4 Focusing the lens
How to focus the lens?
1. Is the lens aperture barrel (A) set to F3.
If yes, go to step 5
If no, go to step 2
2. Loosen the hexagon screw (B). (image 1-5)
3. Rotate the aperture barrel (A) until the F3 arrow matches the arrow on the body.
4. Secure the position of the barrel by tightening the screw.
5. Rotate the lens barrel (limited range!) for picture focusing (image 1-6)
R5976220 TLD (1.2:1) LENS KIT 20062002 5