Barco R9698236, Руководство по установке

Страница: 6 / 16

BARCO ——————————————————— 6 ————————————— Projection Systems
Mounting the fixation bars
What has to be
done
Two fixation bars have to be mounted on the projector frame.
Necessary Tools M6 spanner (n° 10)
To be continued on next page
Mounting the
fixation bars
To mount the bars, follow the next procedure:
1
2
3
4
5
6
1
2
3
3
3
4
Take the two bars to be mounted
Check the distances between the nuts.
If the distances do not coincide at all, slide the nuts A to
reposition them.
Put one of the the bars into the housing of the frame B
and push until the nut C is lined up with the farrest hole D
in the housing. Pull the housing plate a little upwards if the
insertion of the bar turns out to be difficult.
Insert and tighten one of the delivered bolts in the hole D
Don’t tighten the bolts too hard because a horizontal
adjustment of the polarizer may be necessary afterwards.
Do the same for the nut E. If the nut is not in front of the
hole, slide the bar to line up the nut and the hole.
Try to obtain an outcoming distance as shown on image 4
Follow the same procedure for the other bar
Step Action Image
Illustrations
Image 1
26
23
123
Image 2
A