Barco R9040411, Руководство пользователя

Страница: 36 / 209

2. Installation
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting network
takes a few seconds more.
Image 2-32
2.7.10 Serial connection
What is possible with the RS232 connection?
1. Remote control: sending serial commands to control the projector (e.g. using a touchscreen device);
2. Data communications: sending data to the projector or copying the data from the projector to a memory device (hard disc, etc.).
Connect a serial communication line
1. Connect the Sub D9 connector from the RS232 cable to the RS232 input on the projector.
DVI DVI DVI DVI 1 2
DESKTOP INPUT DESKTOP INPUT
IN1 IN1 IN2 IN2
L1 L1
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
L2 L2 L3 L3
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
RS 232 C RS 232 C DVI DVI R.C. R.C.
Image 2-33
RS232 connection (serial communication)
2.7.11 Multichannel display systems
Overview
• Linked CLO
• Linked Dynacolor
• Linked stereo
2.7.11.1 Linked CLO
Linking CLO in a multichannel display system
The linking of the projectors to allow CLO and Dynacolor information interchange is done via the Ethernet connection.
To set the projector as Master see “Setup of the linked projectors in a multichannel system”.
30 R59770718 GALAXY NW SERIES 20/06/2013