Barco R9040411, Руководство пользователя

Страница: 59 / 209

5. Advanced
In some cases an alphanumeric value ( fi le name, ...) has to be entered. Use ↑ or ↓ to scroll through the char-
acter values once the input fi eld is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ012-*/&@#.;.abcdefghijklmnopqrstuvwxyz
5.3 Source selection
Overview
• Source selection
• DVI
5.3.1 Source selection
Selecting a source
The Source selection menu allows to select one of the different inputs. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
Selecting a source from the menu bar (OSD) will always display that source in a full screen mode.
The source names in the menu bar are adapted automatically depending on the type of boards installed in the projector. For example
:
• L1 PC
• L1 DVI
• L3 DVI-1
• L3 DVI-2
• ...
In this case, an VGA–DVI board is installed in the
fi rst layer (L1), a twin DVI board is installed in the third layer (L3) ,...
When selecting a source with a different aspect ratio than the projector’s resolution aspect ratio), the source
can be shown in its native resolution or can be re-scaled to the projector’s resolution, the latter case brings
of course some loss of quality.
The resolution of the projector is 1920 x 1200, which is an aspect ratio of 16:10
5.3.2 DVI
Both single link and dual link DVI signals are accepted by this board.
Selecting a DVI input
In this procedure, we are selecting one of the DVI connectors of layer 3.
1. Press
MENU to activate the Menu bar
2. Press ↓ to Pull down the Source Selection menu
The menu contains an item L3 DVI -1 and an item L3 DVI-2
3. Use ↑ or ↓ to select L3 DVI-x
R59770718 GALAXY NW SERIES 20/06/2013 53