Barco R9010100, Руководство пользователя

Страница: 51 / 137

5. Getting used to the menu structure
5. GETTING USED TO THE MENU STRUCTURE
5.1 How to start up the menus
Box menu structure
The XLM H25 has a box like menu structure which allows easy access to different parameters for setting up the projector.
How to activate
1. Press MENU on the RCU.
The main menu will start up. (menu 5-1)
↑ or ↓ keys
• these keys are used to scroll through the available items within a menu box.
• these keys are used to make adjustments.
ENTER
• Press ENTER to activate a selection
• Use ENTER to con fi rm an adjustment.
BACK (EXIT)
• Press BACK to return to the previous menu. On rugged remote control, EXIT .
MENU (ADJ)
• Press MENU to start up the menu boxes
• Press MENU to exit the menu structure.
Key names between brackets correspond with the keys on the rugged remote control.
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 5-1
5.2 Using the Dialog boxes
How to use the dialog boxes ?
Some parameters are modi fi ed by means of a dialog box, where selections can be made and/or values can be entered.
The values can be entered/adjusted in several way:
Bar scale adjustment with the arrow keys
1. Use the ↑ or ↓ key or the ← or → to adjust the setting.
The bar scale will change. The value next to the bar scale will change accordingly.
Value adjustment using the numeric keys on the remote control
1. Press ENTER to activate the input fi eld.
The fi rst digit will be highlighted.
2. Enter the new value with the numeric keys on the remote control.
3. Select the next digit with the ← or → key and repeat step 2.
4. When fi nished, press ENTER .
Value adjustment using the arrow keys on the remote control
1. Press ENTER to activate the input fi eld.
R5976690 XLM H25 25/05/2009 47