RLM W14 17/04/2017
62
11.Alignment
11.15 Blanking
Top
Press
on the remote control to adjust the top blanking area on
the projected image
Bottom
Press
on the remote control to adjust the Bottom blanking area
on the projected image
Left
Press
on the remote control to adjust the Left blanking area on
the projected image
Right
Press
on the remote control to adjust the right blanking area
on the projected image
Reset
It will reset all the blanking functions to the default settings that is
without any blanking functions enabled.
Use left blanking
function to block
the additional
image on the
screen.
11.16 ScenergiX
The function of ScenergiX is applied in multiple projectors that are projecting at the same screen simultaneously to adjust the
uniformity of the images on the screen.
Status
Press
ENTER
to select
ON
or
OFF
. The function must be set to
ON
in order to enable the function of ScenergiX. If the function is
set to
OFF
, the function of ScenergiX is disabled.
White Level
white level is to set the line from one projector where the other projector last pixel ends. Press
to adjust the white
level of the Top. Bottom, Left, Right direction on the projected image.
As shown in the below drawing, the area D is the overlap area of the projected image 1 and the projected
image 2. The white level lines that is set where the other projector last pixels ends. Color adjustment for
matching the images is done with projector toolset with customs color space x and y or with input balance
on the OSD.
Содержание R9006330
Страница 1: ...RLM W14 User manual...
Страница 92: ......