Barco R9004120, Руководство пользователя

Страница: 85 / 105

12. Advanced Settings
5. Press ENTER to select.
6. Enter the column number in which the display (tile) is situated.
Tiled setup
Tiled setup : [yes]
Complete setup has:
Rows: 3
Columns: 3
This panel is:
Row: 1
Colomn: 1
Back
Menu 12-43
Tiled setup
Tiled setup : [yes]
Complete setup has:
Rows: 3
Columns: 3
This panel is:
Row: 1
Colomn: 1
Back
Menu 12-44
1
2
1 2
3
Image 12-7
Practical example to set up the configuration.
• Start with the first display and give it a IR address. Enter a logical pin code for the IR unlocking and set the IR locking on.
As the PIN code contains four digits, use e.g. the first 2 digits to indicate the row and the second 2 digits to indicate the colomn.
• Set display per display on the same IR address, enter the logical PIN code and set the IR locking on.
• Unlock now the first display and set up the tile configuration and all other adjustments for that display. Set IR locking back on
ON and continue with the next display.
12.10Service
Overview
• Identification screen
• IR address
• Serial communication
• IR locking
• Restore Factory Defaults
12.10.1Identification screen
The display’s identification screen
The identification screen displays the display’s main characteristics.
These are :
•
Display type
• IR address
• RS232 address
• Serial number of the display
• Run time since first start up
• Software version
R5976672 SOLARIS LC40 01042004 81