![background image](http://html1.mh-extra.com/html/barco/r9002410/r9002410_owners-manual_4233952037.webp)
Service Mode
7 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
Cine 5
PROJ. ADDRESS : 0
SOFT. VERSION : 3.00
CONFIG. : FRONT
CE ILING
Baud Rate PC : 9600
Text : ON
Serial No. : 10359852
Projector Setup
Highlight
PROJECTOR SETUP
with the arrow keys and then press
ENTER
, to display the projector Setup menu.
Within the projector setup menu, the following items can be setup :
- Identification
- Total run time
- Change password
- Change language
- Change projector address
- Change baud rate
- Powerup mode
- Common address
Identification
Highlight
IDENTIFICATION
using the arrow keys and then press
ENTER
.
The Identification screen displays information concerning :
-
Projector address.
: To change the address of your projector,
contact a qualified service technician.
-
Software version.
-
Configuration
.
Possible configurations :
Front ceiling
Front table
Rear ceiling
Rear table
-
Baud rate PC
. : Transfer speed for communication with an IBM PC or MAC. The Baud rate of the projector must be the
same as that of the connected computer. When there is a difference, contact a qualified service technician to make the
required changes.
-
Text on/off
. : Indicates in operational mode if the bar scale and value
will be displayed and if warnings will be displayed.
ON
: displayed
OFF
: not displayed
The status can be changed by pressing the TEXT key once on the RCU.
-
Serial No
. : Indicates the manufacturing serial number of the projector. This number can be useful when technical
assistance is required.
SERVICE MODE
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SETUP