![background image](http://html1.mh-extra.com/html/barco/r9002390/r9002390_owners-manual_4233399072.webp)
Service Mode
8-4
5976064 BARCOCINE 8 03052000
Deletion of all blocks
What can be done ?
All block (all settings) can be delete at the same time.
How to delete all blocks ?
1.
Push the cursor key
é
or
ê
to highlight Delete all Blocks (menu 1).
2.
Press ENTER to select.
A confirmation screen will be displayed (menu 2).
3.
Press ENTER to confirm
Press EXIT to return without deleting any block.
Once ENTER is pressed, all block headers and adjustment settings are permanently removed and cannot be restored.
Change password
What can be done ?
The password code (4 digits) can be changed to a new one.
This item is password protected. First the actual password should be entered before continuing.
Note
Password function is only active if the jumper on the controller is in the 'ON' position.
How to select ?
To select Change Password :
1.
Push the cursor key
é
or
ê
to highlight 'Change Password' (menu 1).
2.
Press ENTER to display the password menu (menu 2).
If it is the first time you enter a password protected item, enter your password and press ENTER.
The current password is displayed. The new password must consist of 4 digits between 0 and 9.
How to enter a new password ?
Handle as follow :
1.
Push the cursor key
ç
or
è
to select the digits to be changed (menu 2).
2.
Press a numeric keys to enter the new digit.
3.
Repeat for the other digits.
4.
Press ENTER to save the new password.
Before saving the new password, a confirmation screen will be displayed (menu 3).
5.
When the displayed password is correct, press ENTER to save.
6.
If not correct, press EXIT to cancel the saving.
DELETE ALL BLOCK
All block
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
menu 1
menu 2
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...
Password will be
reprogrammed as xxxx
<ENTER> to confirm
<EXIT> to cancel
CHANGE PASSWORD
Use
ç
and
è
to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
PASSWORD
Enter new password :
0 0 0 0
menu 1
menu 2
menu 3
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...