![background image](http://html1.mh-extra.com/html/barco/r9002384/r9002384_owners-manual_4231258072.webp)
Downloaded from Projector.com
Service Mode
8-5
5976197 BARCOCINE 7 10012001
How to change that address ?
To change that address, handle as follow :
1. Push the cursor key
é
or
ê
to highlight 'Change Projector Address' (menu 1).
2. Press
ENTER
to select.
The Change Projector Address menu (menu 2) will be displayed and the actual address will be filled in. The first digit is highlighted.
3. Push the cursor key
ç
or
è
to select the digit to be changed.
4. Reprogram with the digit keys on the RCU.
5. Press
ENTER
to confirm.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
<ENTER> to confirm
<EXIT> to return.
PROJECTOR ADDRESS
Enter new projector
address :
0 0 0
Use
ç
and
è
to select,
and reprogram
with numeric keys.
Highest address is 255
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
menu 1
menu 2
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
<ENTER> to accept
<EXIT> to return.
BAUDRATE
Select new
baudrate :
9600
4800
2400
1200
600
300
150
110
Select with arrow
keys ;
menu 1
menu 2
Change Baudrate
What can be set up ?
The communication speed between projector and computer has 8 possible speeds. The baud rate speed can be software set up.
The following baud rates are available :
- 9600, 4800, 2400, 1200, 600, 300, 150, 110
How to set up ?
To set up the baudrate :
1. Push the cursor key
é
or
ê
to highlight 'Change Baudrate' (menu 1).
2. Press
ENTER
to select.
The actual baud rate will be highlighted (menu 2)
3. Push the cursor key
é
or
ê
to select the desired baudrate.
4. Press
ENTER
to accept.
Power up mode
What can be done ?
When pressing the power switch, the projector can start up in 'operating mode' or in 'stand-by mode'.
Operating mode : the projector start up and displays image .
Stand-by mode : the projector start up in stand-by and waits until the stand-by button or a digit key is pressed.