![background image](http://html1.mh-extra.com/html/barco/r9002321/r9002321_owners-manual_4227887150.webp)
R5975059 BARCOVISION 708 MULTIMEDIA 200498
APPENDIX D : ADJUSTMENT BLOCKS
APPENDIX
D
: ADJUSTMENT
BLOCKS
R5975059 BARCOVISION 708 MULTIMEDIA 200498
APPENDIX D : ADJUSTMENT BLOCKS
APPENDIX
D
: ADJUSTMENT
BLOCKS
D-1
D-1
Adjustment Blocks (memory blocks)
As the BARCOVISION 708 MULTIMEDIA is digitally controlled, all geometry and
convergence adjustments are stored in the projectors memory as numeric values.
These numeric values are used to control digital potentiometers which in turn,
control the projector. Each source connected to the projector has a unique set of
adjustment data which is automatically downloaded into the projectors digital
potentiometers as the source is selected. This set of adjustment data is referred
to as an
adjustment block
.
An adjustment table is automatically created for a source when the source is first
connected to the projector and the adjust mode is entered. If other sources have
already been connected to the projector and geometry and convergence adjust-
ments have been performed on these sources, the projector will use Linear Digital
Interpolation to create a new block for the new source. This block will provide an
initial set of adjustments for the new source that have been calculated by the
projector from previous experience.
The projectors memory has the capacity to store 32 adjustment blocks. The
adjustment block consists of two parts, the block header and the data representing
the convergence and geometry adjustments of the source the block corresponds
to. The block header contains the basic characteristics of the source and the
projector configuration used to display the source.
Block Header
example of block header
Block number
01
Source number
01
Horizontal frequency
15.6 kHz
Vertical frequency
50 Hz
Input type
video
Scan inversion switch configuration
front/ceiling
The data representing the geometry and convergence adjustments for the source
follows the block header.
The 32 adjustment blocks are in use. What to do?
A. Projector without any peripheral connected to the 'peripheral
800 port'
Connect a new source to the projector. Due to the fact that there are no adjustment
Adjustment Blocks (memory blocks)
As the BARCOVISION 708 MULTIMEDIA is digitally controlled, all geometry and
convergence adjustments are stored in the projectors memory as numeric values.
These numeric values are used to control digital potentiometers which in turn,
control the projector. Each source connected to the projector has a unique set of
adjustment data which is automatically downloaded into the projectors digital
potentiometers as the source is selected. This set of adjustment data is referred
to as an
adjustment block
.
An adjustment table is automatically created for a source when the source is first
connected to the projector and the adjust mode is entered. If other sources have
already been connected to the projector and geometry and convergence adjust-
ments have been performed on these sources, the projector will use Linear Digital
Interpolation to create a new block for the new source. This block will provide an
initial set of adjustments for the new source that have been calculated by the
projector from previous experience.
The projectors memory has the capacity to store 32 adjustment blocks. The
adjustment block consists of two parts, the block header and the data representing
the convergence and geometry adjustments of the source the block corresponds
to. The block header contains the basic characteristics of the source and the
projector configuration used to display the source.
Block Header
example of block header
Block number
01
Source number
01
Horizontal frequency
15.6 kHz
Vertical frequency
50 Hz
Input type
video
Scan inversion switch configuration
front/ceiling
The data representing the geometry and convergence adjustments for the source
follows the block header.
The 32 adjustment blocks are in use. What to do?
A. Projector without any peripheral connected to the 'peripheral
800 port'
Connect a new source to the projector. Due to the fact that there are no adjustment
Содержание R9002321
