Barco R9001950, Руководство пользователя

Страница: 89 / 104

C-5
Barco Control Manager
5976183 BARCOREALITY 6500 31012001
Source
By clicking on one of the buttons on the content pane, the indicated source is selected. The green light in the buttom lights up to indicate
that this source is selected (image 7). When there is no signal on the selected slot, the projector returns to previous displayed source.
The source names next to the slot indications can be freely chosen. To enter or to change these names, go to 'Configuration' and
select item 'Source'.
Image Settings
The image settings as Contrast, Brightness, Color, Tint, Sharpness, Phase and Gamma can be changed by (image 8) :
1 moving with the mouse the slide bar up or down,
or
2 clicking on the up or down arrow on the edges of the slide bar.
A value indication for the setting will be given just below the slide bar of the adjustment.
Changing a setting will have inmediate influence on the displayed image.
Click on init to go back to the default value.
Attention :
While changing one off these image settings with the RCU, the values indicated on the image settings web page will only be changed
after 15 min.
image 7
image 8