Barco R9001870, Руководство пользователя

Страница: 7 / 31

1. SAFETY INSTRUCTIONS
1. SAFETY INSTRUCTIONS
Overview
• General Safety Instructions
• Module Related Safety Instructions
This manual is intended for the user/operator of the installed digital video distribution system. Any change
in cabling or servicing of the installed modules must be performed by service personnel having appropriate
technical training and experience necessary to be knowledgeable of potential hazards to which they are ex-
posed in performing a task, and of measures to minimize the potential risk to themselves or other persons.
1.1 General Safety Instructions
Lightning
For added protection for this video distribution system during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the power cord. This will prevent damage to the modules due to a
lightning and power-line surges.
Object and Liquid Entry
Never push objects of any kind into the modules through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electrical shock. Never spill liquid of any kind on the product.
Servicing
Do not attempt to service the modules yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Damage Requiring Servicing
Unplug the modules from the wall outlet and refer servicing to qualified service personnel under the following circumstances:
• If the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the modules.
• If the module has been exposed to rain of water.
• If the product exhibits a distinct change in performance, this indicates a need for service.
1.2 Module Related Safety Instructions
Overview
• Cine VERSUM 80
• Cine VERSUM 50
• Cine VERSUM Master
1.2.1 Cine VERSUM 80
On cooling
The cooling fan in this projector continues to run for about 1 min. after the projector is turned off. During normal operation, when
turning the power off always use the power down function on the Master or the remote control. Ensure the cooling fan has stopped
before switching off the projector using the power switch.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTION THE POWER CORD. FAILURE
TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE;
Slots and Openings
Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of the projector and to
protect it from overheating, these openings must not be blocked or covered.
R5976490 CINE VERSUM SYSTEM 17012003 3