manualshive.com logo in svg

Barco R9001140, Руководство пользователя

Поделиться
Скачать
Barco R9001140 Скачать руководство пользователя страница 35

Random Access Adjustment Mode

9 - 9

5975207 BARCOGRAPHICS 9100 081196

Side keystone

Highlight Side Keystone by pushing the control stick forward or
backward and press ENTER to select.

The side keystone adjustment is used to align the image if the
projector is mounted as a non standard projection angle.

Push the control stick to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control stick to the left.  The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control stick to the right.  The number indication
below the bar scale will be positive.

Select with        or

then <ENTER>

<EXIT> to return.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

OPTIONS

Select with        or

then <ENTER>

<EXIT> to return.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

OPTIONS

BLANKING

TOP

BOTTOM

LEFT

RIGHT

Select with        or

then <ENTER>

<EXIT> to return.

Bottom blanking

Top blanking

Right blanking

Left blanking

Blanking

Highlight Blanking by pushing the control stick forward or backward
and press ENTER to select.

Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise).  A '0' on the bar
scale indicates no blanking.

The following blanking corrections are possible :

- top blanking
- bottom blanking
- left blanking
- right blanking

Содержание R9001140





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды