Barco QCLD (1.1 - 1.3:1) IRIS, Руководство по установке

Страница: 11 / 23

2. Lens installation
2.3 Adjusting the zoom and focus of lens manually
Necessary tools
Allen key – 1.5 mm
How to adjust the zoom and focus of lens manually?
1. Switch on the projector
2. Turn the zoom ring on the lens to project the image in the desired zoom position
3. Turn the focus ring on the lens until the projected image is well focused
4. Once the clear image is zoomed and focused, tighten the screws of the zoom ring
Image 2-6
Tighten the
fi xation screws of zoom ring
5. Connect the wire from the lens to the NVG (Night Vision Goggles) input and fi x it using the ring
Image 2-7
Connect the wire from the lens to the NVG input
Caution: After connecting the wire, do not adjust the zoom and focus ring.
2.4 Adjusting the lens shift
C
AUTION
:
Once you tighten the screws of the zoom ring, please do not turn it anymore.
The motorized zoom or focus of lens is not available.
R59770400 LENS KIT FOR SIM 5W NIGHT VISION 03/04/2009 7