R5906897 /02
Prometheus III
34
4.1 Positioning the Prometheus III at port window
WARNING:
The installation of the Prometheus III requires at least 4 persons.
General guide lines
•
Use a solid pedestal to put the Prometheus III on. Ensure that the pedestal can handle the weight of the
projector and that all feet of the projector are captured.
•
The pedestal should be placed in front of the port window wall in a manner that the projector front cover is
at a minimum distance of 20 centimeters from the port window.
20 cm
Image 4-1: Positioning at port window
Barco offers a pedestal for the Prometheus III. This universal pedestal allows a solid and easy setup
of the projector. The universal pedestal has a separate compartment to install the UPS unit (if
available) for the Prometheus III. Futhermore, the universal pedestal contains a standard 19
”
rack to
build in the projector peripherals like alternative content switchers.
Required tools
•
14 mm wrench
•
17 mm wrench
Projector centering
1.
If the projector is standalone in front of the port window, center the projector with the theatre screen (see ref A
Image 4-2).
2.
If a film projector is already present (projector will be off-center), try to optimize aim (see ref B Image 4-2).
Note:
Unlike film projectors, it is best to keep the projector lens surface as parallel to the screen as
possible, even if it is significantly above the screen center.
The off-center position slightly increases side keystone, but will minimize horizontal lens offset required.
Содержание Prometheus III
