Barco PH series, Руководство пользователя и инструкция по установке

Страница: 92 / 143

9. Advanced features
4. Repeat the previous steps to remove the PIP mode.
5. To change the position of the sub image, press the ◄ or ► key on the remote control.
Important
• The PIP mode is available only when the ASPECT ratio is set to NORMAL.
• The PIP mode isn’t available with some input signals.
• When the main image signal is lost during the PIP mode, the PIP mode is disabled.
• When there is no video signal for sub image, you can’t change the display position.
• The motion may not run smoothly in the PIP mode.
• You cannot make the MULTI-SCREEN menu settings and SIGNAL menu settings in the PIP mode.
• The size of the sub image varies depending on the input signal and the settings.
9.4 Supervising and controlling by computer
What can be done?
You can supervise and control the projector’s operation using a personal computer via a LAN.
Projector Toolset
Barco’s Projector Toolset software is a free, userfriendly software package that helps you manage your Barco projectors easily
and quickly from one central location, through the network or RS232 connection. Comprising various tools for brightness settings,
diagnostics, image adjustment, picture-in-picture and image control, the Projector Toolset is an indispensable tool for ef
fi cient visu-
alization management.
The Projector Toolset provides your facility management with an intuitive way to manage an entire fl eet of projectors. For example,
in college buildings, museums, conference centers or other facilities with a complex visualization network, clicking one button from
the comfort of a desktop computer to start up your projector
fl eet has a huge impact on your time management. For Details, see the
website of Barco. URL http://www.barco.com > Projector Toolset
AMX Device Discovery
The projector is monitored and controlled by the controller system of AMX.
This is a technology suggested by AMX to facilitate con fi guration of the control system of AMX and its target devices. To use
this technology, it is necessary to set CONTROL SYSTEM in the NETWORK menu. For details, see the website of AMX. URL
http://www.amx.com/
Crestron RoomView Connected™
The projector is monitored and controlled by the controller system and software of Crestron Electronics, Inc.
This is a technology suggested by Crestron Electronics, Inc. to facilitate con fi guration of the control system of Crestron and its target
devices. To use this technology, it is necessary to set CONTROL SYSTEM in the NETWORK menu. For details, see the website of
Crestron Electronics, Inc. URL http://www.crestron.com URL http://www.crestron.com/getroomview/
Important:
• When you set CONTROL SYSTEM to CRESTRON in the NETWORK menu, the web control for Crestron is enabled. For such
control, Adobe Flash Player should be installed in advance. You can download Adobe Flash Player from the website of Adobe
Systems Incorporated.
• When you set CONTROL SYSTEM to CRESTRON in the NETWORK menu, you cannot use the control by Projector Toolset,
which is the software supplied with the projector.
PJLink™
This projector supports standard protocol PJLink™ for projector control and you can control and monitor projector’s operations using
the same application among projectors of different models and different manufacturers.
About PJLink™
• To use PJLink™ function, the PJLink™ application software is required.
• To use this function, set the network certi fi cation properly according to the setting of the network application to be used.
• For the speci fi cations of PJLink™, access to the Web site of Japan Business Machine and Information System Industries As-
sociation (JBMIA). (http://pjlink.jbmia.or.jp/english)
• This projector is fully compliant to the speci fi cations of JBMIA PJLink™ Class 1. It supports all the commands de fi ned by
PJLink™ Class 1, and the compliance has been veri fi ed with the PJLink™ standard speci fi cations Version 1.0.
Important:
88 R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals