Barco PH series, Руководство пользователя и инструкция по установке

Страница: 71 / 143

6. Adjustments with the ADVANCED menu
100
0
0
- - -
- - -
- - -
MANUAL – SETTING
COLOR
GAIN
SATURATION
HUE
RED
WHITE R
WHITE G
WHITE B
AUTO PATTERN
ON
Image 6-20
7. Select an item you want to set by pressing the ▲ or ▼ key.
Select the color you want to adjust using COLOR.
When you set AUTO PATTERN to ON, the test pattern of each color is displayed.
8. Select a setting value by pressing the ◄ or ► key.
9. Repeat step 7 and step 8, if necessary.
Adjustment using a chroma meter
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the ▲ or ▼ key.
OFF COLOR MATCHING
Image 6-21
3. Select MEASURE by pressing the ◄ or ► key.
Set now the measured brightness and the chromaticity coordinates
4. Select MEASURE by pressing the ▲ or ▼ key.
MEASURED DATA
MEASURE
Image 6-22
5. Select MEASURED DATA by pressing the ◄ or ► key.
6. Press the ENTER key.
*
.
***
*
.
***
*
.
***
MEASURE – TARGET DATA
COLOR
GAIN
x
y
RED
AUTO PATTERN ON
Image 6-23
7. Select an item you want to set by pressing the ▲ or ▼ key.
→ Select the color you want to adjust using COLOR.
→ When you set AUTO PATTERN to ON, the test pattern of each color is displayed.
8. Select a setting value by pressing the ◄ or ► key.
9. Repeat step 7 and step 8, if necessary.
6.18 Resetting the settings
About reset
You can reset the SETTING, MANUAL, and MEASURE settings to the factory defaults.
How to reset
1. Display the MULTI-SCREEN menu.
2. Select SETTING , MANUAL or MEASURE by pressing the ▲ or ▼ key.
3. Select RESET by pressing the ◄ or ► key.
4. Press the ENTER key.
R5905597 PHXX SERIES 20/05/2014 67
Downloaded From projector-manual.com Barco Manuals