Barco PDS, Руководство пользователя

Страница: 61 / 174

PDS • User’s Guide 47
4. Operation
Setup Menu
If you save to another configuration file, the
File Association Menu
is updated to
associate the new file to the current input. For more information about the
File
Association Menu
, refer to the “
File Association
” section on page 70.
3.
Scroll down to
Save File
and press
SEL
.
A confirmation message is briefly displayed, after which the system returns to the
Input Menu
.
Figure 4-19.
Saving Input File message (sample)
If you change a setting in the
Input Menu
and press
ESC without
saving changes, your
change will not be restored the next time you select the input or power up the system. The
system displays the following prompt:
Figure 4-20.
Save Input Configuration Prompt (sample)
• Press SEL to save changes.
• Press ESC to exit without saving.
oÉëÉí=`çåÑáÖ
From the
Input Menu
, select
Reset Config
to remove all user-entered configuration
settings from the current input on Program, and restore the input’s parameters from the
system’s internal library values. When you select Reset Config, you will be prompted to
reset (
SEL
) or continue without resetting (
ESC
).
Note that if the current format was derived as a best guess, those “guess” values are
restored when you press
SEL
.
Important
You can assign a configuration file to more than one input. If
you do so, you must exercise caution when deleting the file,
because it will be deleted for all inputs.
Saving Input File
Save Input Cfg?
<SEL> = Yes
<ESC> = No
Note
Resetting configuration parameters does not change the
configuration file associated with the input — it simply assigns
the restored parameters to the existing configuration file. The
file number shown in the
File Association Menu
does not
change.