Barco P110
Preface
P 3
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
1.3
Safety instructions
This section describes safety precautions which must be observed when installing and operating a product
from Barco.
1.3.1
Standards
Safety Regulations
P110 is built in accordance with the requirements of international safety standards as
mentioned in the provided Safety Manual.
Additionally it complies with the standard EN-62368-1.
All these safety standards are the information technology equipment standards, including
electrical business equipment.
EN55032/CISPR32 class A MME (MultiMedia Equipment)
P110 is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
Class A ITE (Information Technology Equipment)
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC compliance statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at
his/her own expense.
1.3.2
Precautions
Read the Safety Manual shipped with your product before installing and operating this
device!
Take note of the instructions which have been compiled both to prevent personal injury and
to ensure the device is operated in accordance with its intended use.
Ensure that you understand and follow all safety guidelines, safety instructions, and
warnings mentioned in this document.