Barco Orion 1080, Инструкция по безопасности и эксплуатации

Страница: 51 / 70

51
6 Functionality
6.1 Powering On and Off
6.1.1 Manual power control
Switch the projector between On and Standby using the POWER switch on the keypad or the wireless remote
control.
The keypad
STATUS indicator is blue when the projector is up and running, flashing yellow when cooling down
and yellow when in standby. No status light indicates that the power has been switched off completely in the
installation.
6.1.2 DPMS - power down
This is a power down mode which needs to be activated in the SETTINGS menu.
When activated it powers down after a specified period of time after a source has been removed. The time out
setting can be specified in the DPMS TIMEOUT function in the same menu, using the arrow keys. If the projector
is powered down in DPMS power save, it will automatically power back on if a valid source is acquired.
6.1.3 Standby ECO mode
Power saving mode sending the projector into a deep sleep setting when in standby. Wake up can be performed
either by pressing the power button on the projector/remote control or remotely via the RS232 connector using
the ASCII protocol / wake on LAN via the Ethernet. If DPMS is enabled and a source signal becomes active again
the projector will return to normal operation.
When in standby ECO mode, the baud rate of the RS232 communication is fixed at 19200.
6.2 Image alignment
Test images are built into the system for easier alignment of the projector
To access the test images, go to the menu entry
INSTALLATION > TEST IMAGE . Run through the various test im-
ages using the arrow keys. When a test image matching the aspect ratio of your screen has been found, you can
match the screen using the zoom, focus, lens shift and aligning the projector physically.
6.2.1 Image orientation
The projector supports the following installation orientations (in relation to the screen):
• Desktop front (default)
• Ceiling front
• Desktop rear
• Ceiling rear
To set the image orientation go to menu entry INSTALLATION > IMAGE ORIENTATION.