www.barco.com
Principle of operation
The O
pti
S
pin
sensor is installed right below the pigtail. It consists
of a photo receiver facing a light emitting diode. During each
revolution, the yarn balloon interrupts the light beam twice.
The time between two successive interruptions serves as the
basis for the calculation of the balloon speed, while the amount
of light obstructed during the interruption is used as a rough
diameter measure.
Functionalities
- Accurate real time spindle speed detection allowing identifica-
tion of slipping spindles.
- Indication of twist level based on spindle speed and delivery
speed.
- Immediate ends down detection, including detection of raffles.
- Classification of yarn breakages during up or down movement
of the ring rail and exact location in the bobbin build-up.
- Continuous yarn diameter estimation allowing detection of ad-
ditional sliver or wrapping on draft cylinders.
- Flagging of problem spindles with section lights and lamp tree.
- Link to speed inverter for optimum control of spinning speed
based on breakage level, ring rail up-down movement and bobbin
build-up.
- Interface to roving stop unit.
- User friendly interface for set-up and reporting.
- Monitoring: produced weight, efficiencies and down time analy-
sis.
Benefits
- Consistent quality.
- Increased efficiency.
- Reduced labor cost.
- Optimized speed profile as function of the bobbin build-up.
- Can be installed on all ring spinning frames.
- Independent of yarn count and traveler type.
- Simple mounting and cabling.
- Low power consumption.
- No moving parts, hence no obstruction for operators or auto-
mation devices.
- Limited maintenance.
Barco n.v.
Th. Sevenslaan 106
8500 Kortrijk
BELGIUM
Tel (intl) 32 56 262611
Fax (intl) 32 56 262690
e-mail: [email protected]
A00518 02 EN 23/8/2007 DPD
Barco Sedo GmbH
Neuwies 1
35794 Mengerskirchen
GERMANY
Tel (intl) 49 64 76310
Fax (intl) 49 64 763131
e-mail: [email protected]
Barco Loepfe srl
Via El Alamein, 11/C
22100 Como
ITALY
Tel (intl) 39 31 3370457
Fax (intl) 39 31 305565
BarcoVision Ltd
Capricorn Park
Blakewater Road
BB1 5SQR Blackburn, Lancashire
UNITED KINGDOM
Tel (intl) 44 1254 662244
Fax (intl) 44 1254 267100
BarcoVision LLC
4420 Taggart Creek Road
Suite 101
28208 Charlotte, North Carolina
USA
Tel (intl) 1 704 3929371
Fax (intl) 1 704 3995588
Sensor Control Unit (SCU
)
All sensors on one machine are connected to the SCU. This unit
offers a touch screen Windows-based user interface, USB interface
and Ethernet connection. The integrated OPC server allows a PC
to connect to the SCU via the O
pti
S
pin
B
rOwSer
allowing remote
operation and service. The standard screen on the SCU shows a
graphical machine view with color coded spindle status and side
by side machine details.
SpinMaster monitoring system
Through the OPC interface, all machines equipped with O
pti
S
pin
can also be connected to the S
pin
M
aSter
production monitoring
system. All connected twisters are shown in a color coded mill
layout. Machines with off-standard conditions are automatically
flagged.