Barco NW-12, Руководство пользователя

Страница: 150 / 181

7. Advanced
Image 7-163
7. Press ENTER
A dialog box will be displayed.
8. Use the arrows to select the Alpha planes check box and press ENTER
Image 7-164
Note: It will take a certain time for the alpha plane to be applied
7.9.7.5 Black level
Overview
• Introduction
• Internal black level
• Beta planes
7.9.7.5.1 Introduction
Brightness uniformity
In a multi channel system the brightness can vary over the different channels/projectors. The brightness level can be matched using
:
1.
CLO: in this case the light power is matched over the different projectors, see CLO in the Lamps section
2. Black level : this will act on the brightness of the “black” color of the image part situated outside the soft edge zones.
Internal black level versus Beta Planes
In the same way as for the soft edge adjustment (Internal vs Alpha planes) this black level adjustment can be fi xed internally by
using a dialog box or externally by uploading a user de fi ned Beta plane . This beta plane will contain the values for the brightness
offset to be applied to the image.
146 R59770286 NW-12 25/09/2008