Barco Nio 3MP, Руководство пользователя

Страница: 14 / 54

K5902114 /03 Nio 3MP LED Display
14
Image 2-11
4. Slide the plastic cover over the neck of the foot.
Image 2-12
5. Remove the four screws fixing the foot while supporting the foot.
Image 2-13
6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm.
2.4 First time starting up
Overview
You are now ready to start up your Nio 3MP LED Display for the first time.
1. Switch on your Nio 3MP LED Display as described in “ Standby switching ” , page 19.
2. Turn on the computer connected to your display.
Installation