Barco MUIP-2112, Руководство пользователя

Страница: 18 / 36

K5902132 (451920612534) /03 MUIP-2112 18
4.1 Safety information
General recommendations
Read the safety and operating instructions before operating the device.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual.
Follow all instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent electric shock or fire hazard, do not remove cover.
No serviceable parts inside. Refer servicing to qualified personnel.
Do not expose this apparatus to rain or moisture.
Modifications to the unit
Do not modify this equipment without authorization of the manufacturer.
Type of protection (electrical):
Monitor provided with external power supply: Class II equipment.
Monitor provided without external power supply: Class I or II, depending from the Class of the external power
supply used.
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or
nitrous oxide.
The equipment is not operable if the air oxygen content is above 25%.
Non-patient care equipment
• Equipment primarily for use in a health care facility, including the patient area.
• The equipment should not be used with life support equipment.
• The user should not touch the signal input ports (SIP) / signal output ports (SOP) and the patient at the
same time. The rear cover must be kept closed and screwed.
Mission critical applications
We strongly recommend to immediately have a replacement display available in mission critical applications.
Use of electrical surgical knives
Provide as much distance as possible between the electrosurgical generator and other electronic equipment
(such as monitors). An activated electrosurgical generator may cause interference with this equipment and
can disrupt the functionality of the display.
Power connection
• Power requirements: The equipment must be powered using medical approved AC/DC power supply .
• The medical approved AC/DC power supply must be powered by the AC mains voltage.
• The power supply is specified as a part of the ME equipment or combination is specified as an ME system.
• The equipment should be installed near an easily accessible wall socket.
• To disconnect the main power, unplug the AC adapter.
• The equipment is intended for continuous operation.
• The compliance of the equipment with the Medical Safety and EMC requirements has been evaluated with
the provided medical grade power supply. If a different power supply is used, further investigation for
Safety and EMC requirements have to be performed at system level.
• Do not use the supplied AC adapter for powering other devices.
Important information