![background image](http://html.mh-extra.com/html/barco/mrfd-243-a/mrfd-243-a_brochure-and-specs_473732006.webp)
www.barcodefense.com
MRFD family
A full range of
Modular Rugged Flat Displays
Technical specifications
K5906063 rev.00.01 0706
Technical specifications are subject to change without prior notice
Front bonding
Barco has developed unique bonding
capabilities to protect the LCD against
extreme environmental conditions
(temperature, shock, vibration,
humidity, EMI,...) and to significantly
improve optical performance and
protection against condensation.
Automatic Phase
Adjust (APA)
The APA function automatically locks
the LCD sampling clock to the
(drifting) graphics generator pixel
frequency, thus avoiding image
artifacts like pixel noise. Drift can be
caused by temperature changes,
electromagnetic interference and
other environmental factors.
LCD Flicker Compensation (patented)
When updating images with high contrast and high density (such as sonar or
dense tactical data) the LCD’s brightness varies with the rate of updating. This
luminance variation, referred to as ‘LCD Flicker’, can cause serious eye-fatigue and
affect the interpretation of the displayed data. Barco has integrated a unique set
of algorithms that reside in the hardware interface of the display (between the
graphics generator and the LCD). This feature compensates for LCD Flicker, without
affecting the displayed data, over all operating parameters.
Extended dimming
range
For many products, Barco uses
in-house manufactured circuitry to
provide advanced dimming solutions.
This provides the advantages of a
darker background resulting in higher
contrast for lower ambient light
conditions and/or high-bright
solutions for higher ambient light
conditions.
VIBRATION
operating
SHOCK
operating
optional
TEMPERATURE operating
non-operating
COLD START-UP
HUMIDITY
operating
EMI/EMC
FCC
EN
MIL-STD
ALTITUDE
operating
non-operating
CRASH SAFETY
non-operating
RAPID DECOMPRESSION
DRIP PROOF
operating
FUNGUS
SALT FOG
SAND DUST
SAFETY
MIL-STD-167-1 Type I, MIL-E-5400T: 2g
30g - 12.5msec half sine
60g - Z axis/40g - X,Y axis
MIL-S-901D (for specific configurations)
-25°C - 55°C
-40°C - 70°C
(MIL-STD-810E)
Start-up @ -25°C
3min. usable picture
20 min. full spec
(MIL-STD-810E)
max. 95% @ 40°C non-condensing
(MIL-STD-810E)
Emission: FCC-A
Emission: EN 55022 Limit A
Immunity: EN 61000-4-x
MIL-STD-461E: aircraft-air force
MIL-STD-461E: Ground-Army
up to 25,000ft
up to 40,000ft
(MIL-STD-810E)
n/a
n/a
At unit level: +/- 45° in all directions
(MIL-STD-810E)
Fungus inert materials are selected
(MIL-STD-810E)
Complies at unit level
(MIL-STD-810D)
Complies at unit level
(MIL-STD-810D)
IEC 60950
MIL-STD-167-1 Type I, MIL-E-5400T: 5g
30g - 12.5msec half sine
n/a
-25°C - 55°C
-40°C - 70°C
(MIL-STD-810E)
Start-up @ -25°C
3min. usable picture
20 min. full spec
(MIL-STD-810E)
max. 95% @ 40°C non-condensing
(MIL-STD-810E)
Emission: FCC-A
Emission: EN 55022 Limit A
Immunity: EN 61000-4-x
MIL-STD-461E: aircraft-air force
MIL-STD-461E: Ground-Army
up to 35,000ft
up to 40,000ft
(MIL-STD-810E)
Crash safety test 40g - 9msec
Operating from 5,000ft (843mbar)
to 35,000ft (238mbar) @ 1 inch Hg/sec
At unit level: +/- 45° in all directions
(MIL-STD-810E)
Fungus inert materials are selected
(MIL-STD-810E)
Complies at unit level
(MIL-STD-810D)
Complies at unit level
(MIL-STD-810D)
IEC 60950
MRFD
MRFD A
Technologically advanced solutions
AR coating
Protective glass
EMI shield
LCD
NVIS filter (if required)
Coating filters
Diffuser
Backlight system
With APA
Without APA
© Bob Houlihan, U.S. Army
6
Si
g
ma
ma
In search of continuous improvement
Barco
Pres. Kennedypark 35 - B-8500 Kortrijk, Belgium
Phone: +32 56 233 412 - Fax: +32 56 233 462
E-mail: [email protected]
Barco Federal Systems Corporation
3059 Premiere Parkway, Suite 100
Duluth, Georgia, 30097-4905, USA
Phone: +1 678 475 8000 - Fax: +1 678 475 8100
Email: [email protected]
BarcoView-TEXEN
7 Rue Roger Camboulives - BP 1226 - F-31037 Toulouse, France
Phone: +33 5 34 63 71 74 - Fax: +33 5 34 63 70 20
Highly efficient
Power Supply Board
Barco’s proprietary Power Supply
Boards are designed for maximum
efficiency. The board’s low-heat
design provides optimum operator
convenience.