Barco MES ACURAS HEAD, Руководство пользователя и инструкция по установке

Страница: 109 / 131

10. Operating AutoGeometry
10. OPERATING AUTOGEOMETRY
Overview
• AutoGeometry Capture
It is not required to log in on Windows on the MCU in order for the eRACU to connect to the XDS RACU server.
C
AUTION
:
In order to use the camera functionality in AutoAlignment, one should boot the MCU and stay
logged out of Windows or permanently stay logged in on Windows during usage of AutoAlignment. A limita-
tion of the camera driver makes it inaccessible after a Windows logoff event. One should reboot or re-login
to be able to use the camera functionality again after a Windows logoff.
10.1 AutoGeometry Capture
AutoGeometry Capture
The AutoGeometry Capture function retrieves the X and Y projector pixel coordinates of the visible corners of each display channel.
During the capturing process, a sequence of patterns will be displayed, depending on the positioning data de
fi ned on the Positioning
page.
AutoGeometry Capture is to be run only when the camera position is de fi ned for each projector channel corner on the Positioning
page. During Capturing process no stray light is allowed.. All light on the screen other than the projector light must be eliminated.
AutoGeometry Capture process can be run for both standard channels or a HUD projector.
Make sure that the AutoGeometry position is de fi ned for each projector channel corner in the selected group
whose coordinate need to be measured.
The best practice is to always capture the AutoGeometry value for all the projectors in the selected group.
How to start the AutoGeometry capture process?
1. Open the AutoGeometry page.
Image 10-1
AutoGeometry: button
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 101