Barco MDSC-8358 RL, Руководство пользователя

Страница: 29 / 45

6. Important information
Installation
• Place the equipment on a fl at, solid and stable surface that can support the weight of at least 3 equip-
ments. If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment.
• Do not allow to climb or rest on the equipment.
• When adjusting the angle of the equipment, move it slowly so as to prevent the equipment from moving
or slipping off from its stand or arm.
• When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to
move the equipment. Please refer to the instruction manual of the arm for instructions on how to move
the arm with the equipment.
• Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
• Suf fi cient expertise is required for installing this equipment, especially to determine the strength of the
wall for withstanding the display’s weight. Be sure to entrust the attachment of this equipment to the
wall to licensed contractors of Barco and pay adequate attention to safety during the installation and
usage.
• Barco is not liable for any damage or injury caused by mishandling or improper installation.
Malfunctions
Disconnect the equipment’s power cord from the AC inlet and refer servicing to quali fi ed service techni-
cians under the following conditions:
• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the equipment.
• If the equipment has been exposed to rain or water.
• If the equipment does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other con-
trols may result in damage and will often require extensive work by a quali
fi ed technician to restore
the product to normal operation.
• If the equipment has been dropped or the cabinet has been damaged.
• If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
• All devices and complete setup must be tested and validated before taking into operation.
• The installer needs to foresee a backup system in case the video falls away.
Technical data
• The monitor is intended for indoor use
• The monitor has been designed to be used in landscape position.
• Power consumption: 250W (depending on the Backlight level)
• Operating Temperature: 10-35°C for performance / 0-40°C for safety
• Operating Humidity: 10%-90% RH
• Operating Altitude: 3000m max.
• Storage: -20 ÷ +60°C; 10 ÷ 90%RH
• IP Protection: IP20 (IP21 for versions with protective glass)
• Class I Equipment, according to the type of protection against electric shock
• The monitor is not intended to be sterilized
This apparatus conforms to:
Medical equipment:
MDD 93/42/EEC amended by 2007/47/EC, Class I
(451920612552) K5902150 MDSC-8358 28/11/2017 27