Barco MDNC-6121, Руководство пользователя, Страница: 31 / 50

K5903146 /03 Nio Color 5MP 31
• Expert image source selection mode enables the dual input channel mechanism . This will make inputs
1 (DisplayPort 1 together with DVI 1) and inputs 2 (DisplayPort 2 together with DVI 2) to be handled as two
separate channels. Switching between channel 1 and channel 2 can in its turn be done automatically or
manually:
- Automatic channel selection will automatically detect the connected video input(s) and show it on the
screen. Priority will be given to channel 1 inputs if both channels have video input(s) connected. In this
way channel 2 can be seen as a backup channel.
- Manual channel selection allows to manually switch to either channel 1, channel 2 or no channel
(causing no input to be displayed).
For each channel, the video input (DisplayPort or DVI) can then also be selected automatically or
manually:
- Automatic input selection gives priority to DisplayPort over DVI for each channel.
- Manual input selection allows DisplayPort or DVI to be selected manually per channel.
To automatically detect the image source:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu and select Automatic .
To manually select an image source:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu and select One Image Source .
4. Enter the Image Source submenu and select one of the image sources.
To enable expert mode (dual input channel mechanism):
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu and select Expert .
To automatically switch between the input channels:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu and select Expert .
4. Enter the Automatic Selection of Input submenu and select Enabled .
To manually switch between the input channels:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Image Source Selection submenu and select Expert .
4. Enter the Automatic Selection of Input submenu and select Disabled .
5. Enter the Left submenu and select one of the input channels.
To select the image source on channel 1 and 2:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
Advanced operation