Barco MDNC-2221, Руководство пользователя

Страница: 14 / 44

3. Display installation
3.5 Routing the cables & Reattach the connector compartment
cover
To route the cables
1. Route all connected cables through the cable routing channel in the stand of your display.
Tip: The cable straps at the inside of the connector compartment allow you to fi x the cables for better
shielding of the cables.
To Reattach the connector compartment cover
1. Reattach the connector compartment cover by sliding the cover’s bottom in position and then push the
cover’s top. You’ll hear a “click” sound of the cover’s clips when the connector compartment cover is
in position.
3.6 VESA-mount installation
C
AUTION
:
Use suitable mounting apparatus to avoid risk of injury.
W
ARNING
:
Never move a display attached to an arm by pulling or pushing the display
itself. Instead, make sure that the arm is equipped with a VESA approved handle and
use this to move the display.
Please refer to the instruction manual of the arm for more information and instructions.
12 K5903058 NIO 2MP LED DISPLAY 04/03/2014