Barco MDCC-4230, Руководство пользователя

Страница: 15 / 55

3. Display installation
3.8 VESA-mount installation
W
ARNING
:
Use an arm that is approved by VESA (according to the VESA 100 mm stan-
dard).
Use an arm that can support the weight of the display. Refer to the technical speci fi ca-
tions of this display for the applicable weight.
C
AUTION
:
You should mount the panel in landscape position. Portrait position is pos-
sible but not supported.
Overview
The panel, standard attached to a stand, is compatible with the VESA 100 mm standard. Thus, it can be
used with an arm that is approved by VESA. This chapter shows you how to release the panel from the
stand and how to attach it to an arm. If you’re not using an arm, you can skip this chapter.
1. Gently pull open both lower sides of the cover.
K5902056 CORONIS FUSION 4MP / 6MP 31/10/2014 13