Barco MCM-50, Руководство пользователя

Страница: 34 / 147

6. Setup and configuration
Parameter Description
Type of fi eld
Use DHCP When this radio button is selected, the MCM-50
will dynamically obtain its IP address from the
DHCP server. This implies that a DHCP server
is active in the local network and that a Host
name is entered in the MCM-50. Tickable radio button
IP Address
IP address in case of Fixed IP Editable if Use Fixed IP is set.
Subnet Mask Subnet Mask in case of Fixed IP Editable if Use Fixed IP is set.
Gateway Gateway IP address (optional) in case of Fixed
IP Editable if Use Fixed IP is set.
Host name
Host name in case of DHCP network Editable if Use DHCP is set.
Overview
• Con fi guring the MCM-50 for a Private Subnet
• Con fi guring the MCM-50 for a DHCP network
6.5.1 Con fi guring the MCM-50 for a Private Subnet
Description
To con fi gure the MCM-50 for a Private Subnet, the following steps are required:
• connect the MCM-50 to the network;
• in the MCM-50, enter a fi xed IP address, Subnet Mask and optionally a Gateway IP address;
• set the network con fi guration of any device that is connected to the same subnet to a fi xed IP address within the same subnet
range.
Setting a fi xed IP address in the MCM-50
1. In the OSD, navigate to Installation > Network Settings... and press ENTER to select.
Image 6-8
2. In the dialog box that appears, navigate to Use Fixed IP and press ENTER to select.
30 R5909057 MCM-50 17/05/2016