Color calibration
Using Barco’s dedicated calibration
software and sensor, the color
temperature, brightness and gamma
can be adjusted to an absolute target
with small error. Correct color targets
are important for good color judging,
display wall uniformity as well as for
backdrop applications.
FrameLock and Genlock
functionality
Barco’s LC series displays automatically
lock to the input frequency of the
connected source in order to play in
phase-sync and frame-sync with the
input signal (50-60 Hz). Since no frame
rate conversion is done, the motion is
smooth, without judder. In case of
backdrop applications, the camera will
also run in sync with the display when
the si gnal source is genlocked with the
studio camera. No phase shift will be
visible in the recording.
Low latency
Barco’s 30”, 42” and 47” displays are
configured for the lowest possible impact
on system latency.
Low noise, fanless system
The fanless design of the 42” and 47”
displays keeps the noise level below
21 dB(A), which is perfect to meet the
needs of small rooms, such as TV news
rooms or board rooms.
Excellent broadcast
reproduction
Integrated mounting interfaces
according to VESA standards allow for
easy wall or ceiling installation.
Wrong color balance results in a bluish image in
backdrop applications (left picture).
3200K color adjustment results in a perfect color
balance (right picture).
LC_series_bro_nieuw.qxd:- 21-09-2007 15:11 Pagina 7
