30
ImagePRO-II • User’s Guide
4. Menu Orientation
Using the Menu System
j~âáåÖ=~=jÉåì=pÉäÉÅíáçå
To select a menu item, use the
ADJUST
knob to scroll to the item, then press the
SEL
button on the front panel:
•
To scroll through a menu:
~
Turn the
ADJUST
knob counter-clockwise to scroll down.
~
Turn the
ADJUST
knob clockwise to scroll up.
•
To open a submenu, scroll to the submenu line and press
SEL
.
•
To change a parameter, scroll to the desired line and press
SEL
. The navigation
cursor changes to the edit cursor. Use the
ADJUST
knob to modify the value:
~
Turn the
ADJUST
knob clockwise to increase a value.
~
Turn the
ADJUST
knob counter-clockwise to decrease a value.
Then press
SEL
to accept a parameter or value. The edit cursor changes back to
the navigation cursor.
bñáíáåÖ=~=jÉåì
•
In the edit mode (i.e., the edit cursor is visible), press
ESC
to exit a menu without
changing the original parameter.
•
To navigate back up the menu structure, press
ESC
again. Each press takes you
back up the menu tree by one level.
^åëïÉêáåÖ=~=jÉåì=nìÉêó
The
SEL
button is used to answer
Yes
to certain menu queries. The
ESC
button is used to
answer
No
to menu queries. The following illustration shows an example of a menu query.
Figure 4-6.
Save Input Configuration Query
Note
Throughout this user’s guide, the term “
select
” is used as an
abbreviation for “scroll to a menu line and press
SEL
.”
Example:
Select the
Input
menu to begin
configuring inputs.
Note
You must press
SEL
to accept the value.
Save Input Config?
<SEL> = Yes
<ESC> = No