Barco iD R600+, Руководство пользователя

Страница: 33 / 179

5. Getting started
5. GETTING STARTED
5.1 Start up
How to start up the projector ?
1. Press the Standby button on the RCU or the local keypad (image 5-1)
The last selected source is displayed
9 0
EN T ER
M EN U B A C K
D I G I
Z O O M
PH A SE
PA U SE PI P
L O G O
Image 5-1
5.2 Creating your personal PiP Layout
As an example: the layout to be created must contain :
- one video source : composite video
- one data source : RGBHV
How to create a new layout based on an existing layout ?
1. Select an existing custom layout (non factory) from the
PiP select
menu (image 5-2)
2. Add the video window from the
PiP add window
menu by selecting the desired composite video source (image 5-3, image 5-4)
Note: You can only use one (2 in case of an optional video input) video source i.e. if the layout already contains a video source,
it will be impossible to add another (different) video input .
3. Follow the instruction wizard (size, position, order)
4. Repeat the previous steps to add the RGB source
5. Save the PiP layout in the
PiP layout/Save as
menu by typing a new name
See image 5-5.
Image 5-2
R5976874 ID PRO R600/R600+ 21/09/2006 27