Barco ICMP, Руководство по установке

Страница: 8 / 18

R5905769 /04 ICMP/ICMP-X HDD 8
1.1 General
Document overview
This document gives a brief introduction into the ICMP HDD, provides in a table a summary of all types of
HDD swaps available, describes the LED status of the HDD and describes the HDD removal and installation
instructions.
The latest version of this document can be downloaded from the Barco website www.barco.com or from the
secured Barco website https://my.barco.com .
About ICMP
The ICMP is a removable electronic assembly situated in the Card Cage of the projector. The ICMP stores,
decrypts and decodes DCI cinema content and delivers it to the projector in a usable format, all integrated into
a single assembly placed directly in the projector.
2 1
Image 1-1
1 ICMP
2 HDDs for ICMP
There are several ICMP types (ICMP with Displayport, ICMP with HDMI 2.0, ICMP-X,...). For detail
information about the ICMP or Barco digital cinema projector refer to the manual of the projector which is also
available on the Barco website.
GEN1 and GEN2 storage controller
The ICMP-X is equipped with a GEN2 storage controller while the legacy ICMP has an GEN1 storage
controller.
The GEN2 storage controller supports SSD and uses another disk initialization type. This implies that HDDs
initialized for the legacy ICMP (with GEN1 storage controller) are not interchangeable with the ICMP-X without
re-initialization. Note that a re-initialization process result in lost of content. See
“ What are the possible HDD
swaps ” , page 11.
It ’ s possible to upgrade an ICMP with a GEN2 storage controller. For more info about the upgrade kit and
instructions see Barco website.
How to recognize an ICMP-X or an upgraded ICMP with GEN2 storage controller
At the first glance ICMP-X is very similar to ICMP (the previous generation device) however both devices are
not fully compatible and not interchangeable.
Unlike the previous versions the name of ICMP-X appears on the upper left side of the front face (under the
Barco logo).
HDD(s) on ICMP