Barco HDQ--2K40 страница 58 Скачать руководство пользователя

Страница: 58 / 341

5. Lenses & Lens Holder

4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).

Note:

The lens holder is placed default in the On-Axis position at factory.

5. Gently insert the lens in such a way that the lens connector matches the socket.

Image 5-10
Mount lens

6. Insert the lens until the connector seats into the socket.

the pin (3) on the lens holder matches with the sleeve in the lens.

the connector seats into the socket (2)

Warning:

Do not release the Lens yet, as the Lens may fall out of the Lens Holder.

7. Secure the lens in the lens holder by sliding the lens lock handle into the “locked” position, which is away from the lens power

supply socket. Ensure the lens touches the front plate of the lens holder.

Image 5-11
Fix lens

8. Continue with the installation of the lens

xation mechanism, see "Installing the lens

xation mechanism", page 56.

AUTION

Never transport the projector with a Lens mounted in the Lens Holder. Always remove the Lens

before transporting the projector. Neglecting this can damage the Lens Holder and Prism.

R5905303 HDQ 2K40 02/03/2015

Содержание HDQ--2K40






















































































































































































































































































































































Результаты поиска

Содержание HDQ--2K40

Отзывы:

Похожие инструкции для HDQ--2K40

Бренды по названию

Популярные бренды

Barco HDQ--2K40, Руководство пользователя

Результаты поиска

Содержание HDQ--2K40

Отзывы:

Похожие инструкции для HDQ--2K40

Бренды по названию

Популярные бренды